Demonstration Requirements
==========================

+--------------------+-----------------------+
|     **Required**   |     **Optional**      |
+====================+=======================+
| -  Laptop          | -  Cisco AnyConnect   |
+--------------------+-----------------------+

Demonstration Configuration
---------------------------

This demonstration contains preconfigured users and components to
illustrate the scripted scenarios and features of this Cisco solution.
All access information needed to complete the demonstration scenario, is
located in the **Topology** and **Servers** menus of your **active
demonstration**, and throughout this script.

-  **Topology Menu**. Click on any server in the topology to display the
   available server options and credentials.

-  **Servers Menu**. Click on |image0| or |image1|\ next to any server
   name to display the available server options and credentials.

Demonstration Topology
----------------------

The following is the virtual demonstration topology, which consists of
the following virtual machines:

-  APIC Simulator – version 2.1(1h)

   -  APIC1, APIC2, APIC3

   -  Leaf1 and Leaf2

   -  Spine1 and Spine2

-  VMware Virtual Center Server 5.5 Appliance

-  F5 iWorkflow – release 2.0.2

-  F5 BIG-IP – release 12.0.0 HF4

-  VMware ESXi 5.5 Host 1

-  VMware ESXi 5.5 Host 2

-  Workstation – Windows 8

-  NetApp EDGE Storage Appliance – ONTAP 8.2

-  Linux Tools Repository (Ubuntu 12.04)

|image2|

This demonstration contains preconfigured users and components to
illustrate the scripted scenarios and features. All access information
needed to complete the scripted scenarios is located in the **Topology**
and **Servers** menus of your **active demonstration**, and throughout
this script.

Demonstration Preparation
-------------------------

Follow the steps below to schedule and configure your environment.

#. Browse to `dcloud.cisco.com <http://dcloud.cisco.com>`__, choose the
   location closest to you, and then login with your Cisco.com
   credentials.

#. Schedule a session. [`Show Me
   How <http://dcloud.cisco.com/dCloud/help/sched_demo.html>`__].

#. Test your bandwidth from the demonstration location before performing
   any scenario. [`Show Me
   How <http://dcloud.cisco.com/dCloud/help/connect_test.html>`__]

#. Verify your session has a status of **Active** under **My
   Demonstrations** on the **My Dashboard** page in the Cisco dCloud UI.

#.  It may take up to **15 minutes for your demo to become active**.

#. Access the workstation named **wkst1** located at **198.18.133.36**
   and login using the following credentials: Username:
   **dcloud\\demouser**, Password: **C1sco12345**.

#. **Option 1**: **(Preferred)** Use **Cisco AnyConnect** [`Show Me
   How <http://dcloud.cisco.com/dCloud/help/install_anyconnect_pc_mac.html>`__]
   and the **local RDP client** on your laptop [`Show Me
   How <http://dcloud.cisco.com/dCloud/help/local_rdp_mac_windows.html>`__].

   -  Accept any certificates or warnings.

   -  From the **Start** menu, click **Desktop**.

#. **Option 2**: Use the **Cisco dCloud Remote Desktop client with
   HTML5**. [`Show Me
   How <http://dcloud.cisco.com/dCloud/help/access_demo_wkstn.html>`__]

   -  Accept any certificates or warnings.

   -  From the **Start** menu, click **Desktop**.

#. Start Menu

   |image3|

#. The fabric discovery is automatically started at demo setup.
   Double-click the **APIC Login** icon |image4| and login
   (``admin``/``C1sco12345``).

#. Select **Fabric** from the top menu.

#. Select **Inventory** from the top sub-menu.

#. In the left menu, click **Fabric Membership** and check that you have
   the 4 devices populated as shown in Figure 3. (IP addresses may
   vary.)

.. NOTE:: The fabric discovery can take up to 15 minutes to complete. If
   you login before 15 minutes have passed, all devices may not be fully
   discovered.

#. Completed Fabric Membership

   |image5|

.. NOTE:: To demonstrate Fabric Discovery, reset the APIC Simulator (see
   `Appendix A <#Reset_APIC_Simulator>`__.) If only TEP-1-101 is present at
   login, see `Appendix B <#Fabric_Script>`__ to discover the Fabric.

#. Double-click the **VI Login** icon |image6| and login with the
   following credentials: Username: **demouser**, Password:
   **C1sco12345**. (If password is grayed out, click **Login**.)

#. Check that the **F5 iWorkflow and BIG-IP** virtual machine is present
   and running as below.

#. Virtual Center Inventory

   |image7|

.. NOTE:: If the F5 BIG-IP and iWorkflow VMs are not present in the
   L4-L7 Services Resource Pool, `add it manually <#Add_BIGIP>`__.

.. |image0| image:: /_static/class2/image5.png
   :width: 0.10000in
   :height: 0.11667in
.. |image1| image:: /_static/class2/image6.png
   :width: 0.12500in
   :height: 0.13333in
.. |image2| image:: /_static/class2/image7.png
   :width: 5.14211in
   :height: 3.40030in
.. |image3| image:: /_static/class2/image8.png
   :width: 6.50000in
   :height: 1.71389in
.. |image4| image:: /_static/class2/image9.png
   :width: 0.49167in
   :height: 0.55000in
.. |image5| image:: /_static/class2/image10.png
   :width: 6.34167in
   :height: 1.34167in
.. |image6| image:: /_static/class2/image11.png
   :width: 0.40833in
   :height: 0.55000in
.. |image7| image:: /_static/class2/image12.png
   :width: 4.21637in
   :height: 3.08065in